全浸形铂电阻温度计(PRT)探头 Fluke 5606

产品名称：	全浸形铂电阻温度计(PRT)探头 Fluke 5606
产品型号：	Fluke 5606
产品品牌：	美国 - 福禄克
产品特色：	范围：-200°C～160°C 校准精度：±0.05°C 准确度：±0.04°C at 0.01°C；±0.06°C at 160°C 短期重复性：±0.03°C at 0.01°C；±0.04°C at 160°C

Fluke 5606 全浸形铂电阻温度计(PRT)探头

PRTs for laboratory freezers, autoclaves, and furnaces

▪ 5606: -200°C to 160°C

▪ Calibration accuracy of ±0.05°C

▪ Transition junction and lead wires can withstand full PRT temperature range

▪ Unique probe seal of 5606 prevents ingress of moisture

▪ Calibration not included; NVLAP-accredited calibration optional

The 5606 Full Immersion PRTs are designed to perform in extreme environments where both the transition junction and the lead wires are required to withstand temperatures covering the entire operating range of the probe. (“Immersion” in this case simply means exposure to temperatures other than ambient and does not necessarily refer to the medium to which the PRT and its components are subjected.)

Applications where “full immersion” of probe, transition junction, and lead wire is required can include calibration or validation of sensors used in laboratory or bio freezers, walk-in refrigerators, autoclaves, ovens, stability test chambers, furnaces or incubators. Other applications might include IQ/ OQ/PQ qualification procedures, temperature mapping, or data logging in temperature controlled spaces or environmental chambers.

The 5606 is just two inches (50mm) in length with a sheath diameter of 1/8 inch (3.1mm). Since it can be fully immersed over its entire temperature range, you don’t have to worry about calculating minimum immersion depth— immerse the entire probe, transition junction, and lead wires, in either non-corrosive liquids or dry mediums ranging from –200°C to 160°C.

The 100Ω precision sensing element (alpha = 0.00385) is specially constructed to prevent the ingress of moisture while achieving calibration accuracies as good as ±0.05°C. You get both accuracy and flexibility built into a small, durable package.

The lead wires of the 5606 are made of single-conductor enameled copper wire which prevents moisture from wicking to the sensing element as it would if a more common, stranded lead wire were used. The diameter of the lead wire is no greater than 0.2mm, making it easy to run lead wires through a freezer door to your readout or transmitter with effectively zero energy loss. The 5606 has been proven in common heat transfer fluids such as silicone oil, mineral oil, ethanol, and even liquid nitrogen with no degradation of the transition junction seal or lead wire insulation.

If you need longer lead wire than the standard length, call one of our Application Specialists today for a free quote. They can also help you determine which readout and probe termination are best suited for your application or help you select the right calibration for your probe.

技术指标

General Specifications
Temperature range	-200°C～160°C
Nominal resistance at 0.01°C	100Ω ±0.1Ω
Temperature coefficient	0.00385Ω/Ω/°C
Accuracy^[1]	±0.04°C at 0.01°C ±0.06°C at 160°C
Short-term repeatability^[2]	±0.03°C at 0.01°C ±0.04°C at 160°C
Drif t ^[3]	±0.03°C at 0.01°C ±0.04°C at 160°C
Hysteresis	±0.015°C
Sheath length	50mm ±5mm (2 in ±0.2 in)
Sheath diameter	3.1mm ±0.1mm (1/8 in ±0.004 in)
Sheath material	316 SST
Transition junction temperature range^[4]	-200°C～160°C
Sensor length	30mm ±3mm (1.2 in ±0.1 in)
Sensor location	3mm ±1mm from tip (1.2 in ±0.04 in)
Minimum insulation resistance	20MΩ at 23°C
Minimum immersion length	Full immersion
Maximum immersion depth in liquid medium	Full immersion
Response time ^[5]	12 seconds typical
Self heating (in 0°C bath)	±0.003°C
Lead-wire cable type	Enameled copper wire
Lead-wire length	2.4meters (8 ft)
Lead-wire temperature range	160°C
Calibration	Calibration not included. NVLAP accredited calibration available. See ordering information.
^[1] Includes calibration and 100 hr drift (k = 2). ^[2]Three thermal cycles from min to max temp, includes hysteresis, 95 % confidence (k = 2). ^[3]After 100 hours at max temp, 95 % confidence (k = 2). ^[4]Temperatures outside this range will cause irreparable damage. ^[5]Per ASTM E 644.

Calibration uncertainty	Fluke 5606
Temperature	1924 Calibration Uncertainty ^†	Tolerance w/out Calibration ^‡
-197°C	0.03°C	0.4°C
-38°C	0.03°C	0.2°C
0°C	0.03°C	0.1°C
100°C	0.045°C	0.3°C
157°C	0.05°C	0.4°C
^†Lab code 200348-0 ^‡Each PRT includes a certificate with a measured R0 value. An uncalibrated 5606 meets ASTM E 1137 Grade A Classification of Tolerances. Use the coefficients below to achieve the tolerances listed in the “No Calibration” column or calculate the Grade A tolerance using the following formula: Grade A = ±[0.13 + 0.0017\|t\|]°C where: \|t\| = value of temperature (°C) without regard to sign. See ASTM E 1137. R0: Enter the R0 value provided A: 3.9083 x 10^–3 B: –5.775 x 10^–7 C: –4.183 x 10^–12

型号和配件

型号	描述
Fluke 5606-50-X	探头，浸入式 PRT，50mm，-200~160°C † X = 终止。指定 “A”(适用于914X的INFO-CON）； “B”（裸线）； “D”(适用于Tweener 温度计的5针DIN）； “G”(金针）； “I”（适用于1521或1522的INFO-CON）； “J”（香蕉插头）； “L”（微型平接线片）； “M”（微型香蕉插头）； “P”（适用于1523或1524的 INFO-CON）； “S” (平接线片）；

配件	描述
2603	小探头提行箱
1924-4-10	PRT 校准，
1930-4-10	系统对比校准，-200 至 157°

● Fluke 一级温度标准实验室的建立方案英 ● Fluke 工业测温仪与探头选型指南 ● Fluke 二级计量校准实验室的建立方案 ● Fluke 热电偶基本原理英 ● Fluke TCAL基标准实验室的建立方案 ● Fluke 在温度自动校准系统中计算校准的不确定性英 ● Fluke 温度测量和校准—测试技术人员须知英 ● Fluke 温度校准设备：技术人员指南英 ● Fluke 如何选择热电偶校准设备英 ● Fluke 温度自动检定系统—电力变压器温包自动检定系统解决方案 ● Fluke 工业级温度传感器56xx系列选型指南 ● Fluke 温度自动检定系统—工业铂电阻自动检定系统解决方案 ● Fluke 测温探头深度浸入真的重要吗？英 ● Fluke 温度自动检定系统—铂电阻热电偶检定系统解决方案 ● Fluke 7380 温度自动校准系统介绍英

产品分类